How Much Does it Cost to Rescreen a Pool Enclosure in Florida?
Updated: 23 hours ago
A complete pool enclosure rescreen in Florida commonly costs approximately $1,500 to $5,000 for a typical one-story enclosure. Large cages, two-story enclosures, difficult roof panels and premium screen materials can raise the price to $4,000 to $8,000 or more.
Replacing only one or two damaged panels usually costs considerably less. However, the final price depends on the enclosure’s actual screened area, height, condition, access and screen material. These figures are planning ranges, not a project quote. An onsite inspection is the best way to determine the exact cost for your enclosure.
Upgrade Your Outdoor Space
Florida Pool Enclosure Rescreening Cost at a Glance
Project type | Typical planning range |
One or several damaged panels | Usually a few hundred dollars |
Small one-story enclosure | $1,500–$3,000 |
Average one-story pool enclosure | $2,000–$5,000 |
Large or two-story enclosure | $4,000–$8,000+ |
Premium or specialty screen | Adds to the base rescreen cost |
Frame, door or structural repairs | Quoted separately |
These ranges overlap because no two pool cages have exactly the same dimensions, roof design or access requirements. A low-profile rectangular enclosure with standard fiberglass screen may fall near the lower end. A two-story cage with steep roof panels, damaged spline channels or heavy-duty polyester mesh will usually fall toward the upper end.
What Does a Full Pool Cage Rescreen Include?
A full rescreen normally involves:
Removing the worn or damaged screen
Removing deteriorated spline
Installing new screen across the enclosure
Installing new spline to secure the screen
Trimming and tensioning each panel
Cleaning up and disposing of the removed material
Doors, handles, closers, fasteners, aluminum framing and structural repairs may not be included in the base price. Ask the contractor to list these items separately in the written estimate.If the aluminum structure is sound but most of the screen is brittle, sagging or torn, a complete pool enclosure rescreen is usually more practical than continuing to replace individual panels.
What Affects the Cost of Rescreening a Pool Enclosure?
1. The Actual Screened Area
Contractors need to account for every wall and roof panel. A 20-by-40-foot pool cage does not necessarily contain only 800 square feet of screen. The walls, roof design, height and number of individual panels can make the total screened surface substantially larger. This is also why online “cost per square foot” estimates can be misleading. One estimate may use the enclosure’s footprint while another uses the total amount of mesh being installed.
2. One-Story Versus Two-Story Construction
Tall enclosures generally cost more because they require:
Additional safety equipment
More setup time
Longer screen runs
More difficult roof access
Additional labor for elevated panels
A two-story rescreen should not be priced like a small ground-level lanai, even if their footprints appear similar.
3. Screen Material
The screen you select can materially change the quote.
Standard 18×14 Fiberglass Screen
Standard fiberglass is a common, budget-friendly choice for Florida pool and patio enclosures. It provides good airflow, visibility and protection from most common insects. It is often the most economical option for a complete rescreen.
No-See-Um Screen
No-see-um screen uses a tighter weave intended to block smaller insects. It can be useful near water, wooded areas and other locations where biting midges are a problem. The denser weave can reduce airflow and may cost more than standard fiberglass. It also places different wind loads on an enclosure, so it should be selected with the cage’s design and condition in mind.
Heavy-Duty Polyester Screen
Vinyl-coated polyester products are stronger and more tear-resistant than standard fiberglass. They are frequently selected for high-traffic enclosures or by homeowners prioritizing durability. Heavy-duty material costs more upfront, but it may provide better long-term value when premature tearing is a recurring problem.
Pet-Resistant Screen
Pet screen is thicker and designed to resist scratching and punctures. Because it is heavier and more expensive, it is often installed selectively around doors and lower wall panels rather than across the entire roof.
Not sure which material fits your priorities? Read our guide to choosing the best screen for a Florida lanai.
4. Roof Design and Panel Size
Flat wall panels are normally easier to replace than enclosure roof panels. Mansard roofs, dome roofs, large picture-window openings and unusual panel configurations can require more material, equipment and labor.
Oversized openings may also require wider rolls or stronger material to achieve the correct fit and tension.
5. Condition of the Spline Channels
Spline is the flexible material that holds the mesh inside the aluminum frame’s grooves.
During an older enclosure’s rescreen, a contractor may discover:
Brittle or undersized spline
Damaged spline channels
Old material stuck inside the grooves
Previous repairs that were installed incorrectly
New spline is commonly installed during a full rescreen. Frame or channel damage may require additional work.
6. Doors, Hardware and Fasteners
Worn door sweeps, closers, handles and hinges are separate from the screen itself. Rusted fasteners or damaged doors can also increase the project scope.
Ask whether the estimate includes:
Screen doors
Door hardware
Bug sweeps
Fastener replacement
Kick plates
Pet-resistant lower panels
7. Aluminum or Structural Damage
Rescreening replaces the mesh. It does not correct bent beams, loose anchors, damaged framing or an enclosure that is pulling away from the home.
Structural problems should be evaluated before new screen is installed. Installing tightly tensioned screen onto a compromised cage may conceal the problem without resolving it.
Structural alterations can also trigger different permit and code requirements from a mesh-only rescreen. Review our guide to Florida screen enclosure regulations and confirm local requirements before work begins.
Partial Repair or Complete Rescreen?
Replacing several panels makes sense when:
The remaining screen is still flexible and secure
Damage is isolated to one area
The enclosure was screened relatively recently
One panel was punctured by an impact or animal
A full rescreen may offer better value when:
Several panels are torn or sagging
The mesh feels dry, brittle or powdery
Screens continue failing in different areas
The existing material is faded or separating from the spline
The panels are similar in age
Repair costs are beginning to accumulate
Replacing one old panel does not stop the surrounding material from deteriorating. If failures are widespread, continuing to pay for individual repairs can eventually cost more than rescreening the entire enclosure.
Is Standard or Premium Screen the Better Value?
The least expensive screen is not automatically the least expensive long-term choice.
Standard fiberglass may be appropriate when your priorities are:
Lower initial cost
Good airflow
Clear outward visibility
Protection from common insects
A premium polyester or specialty screen may be worth considering when your priorities are:
Better resistance to tears
Pet resistance
Protection from smaller insects
Longer service life
Fewer recurring panel repairs
Material should be selected for the location and enclosure. Denser and heavier screens affect airflow, visibility, installation and wind pressure differently.
How to Compare Pool Rescreening Quotes
A useful estimate should explain exactly what you are buying. Before selecting a contractor, compare:
Screen manufacturer and product: “Premium screen” is not a product specification.
Mesh type: Confirm whether the quote includes fiberglass, polyester, no-see-um or pet-resistant material.
Areas included: Make sure walls, roof panels and doors are clearly identified.
Spline replacement: Ask whether new spline is included throughout the enclosure.
Access charges: Confirm whether tall walls or two-story roof panels affect the price.
Repairs: Door, frame, fastener and structural work should be itemized.
Cleanup: Removal and disposal of the old material should be addressed.
Warranty: Ask what is covered by the material warranty and the workmanship warranty.
Licensing and insurance: Verify the contractor’s credentials before authorizing the work.
Be cautious when one estimate is dramatically lower than the others. It may exclude roof panels, doors, spline, disposal or repairs that another contractor included.
How Long Does It Take to Rescreen a Pool Enclosure?
Many straightforward one-story rescreens can be completed within one or several working days. Large cages, two-story structures, specialty materials and repair work can take longer.
Weather, access and the enclosure’s condition also affect scheduling. The contractor should inspect the cage before providing a reliable project timeline.
Can You Rescreen a Pool Enclosure Yourself?
A homeowner may be able to replace a small, accessible wall panel. A complete pool cage is a different project.
Full rescreening requires proper tension, compatible spline, large rolls of material and safe access to overhead panels. Roof panels and two-story enclosures present significant fall risks and are generally better handled by trained professionals with appropriate equipment.
Poor tension can leave the screen sagging. Excessive or uneven tension can damage the material, pull it from the channel or place unnecessary stress on the enclosure.
Frequently Asked Questions
What is the average cost to rescreen a pool enclosure in Florida?
A typical one-story Florida pool enclosure may cost approximately $1,500 to $5,000 to rescreen. Large cages, two-story enclosures and premium materials may cost $4,000 to $8,000 or more. An onsite measurement is required for an accurate quote.
How much does it cost to replace one pool screen panel?
Replacing one or several accessible panels usually costs a few hundred dollars, depending on the panel’s size, location, material and the contractor’s minimum service charge. Elevated roof panels generally cost more than ground-level wall panels.
Is rescreening cheaper than replacing a pool cage?
Yes—when the aluminum frame remains structurally sound. Rescreening replaces the mesh and spline, while cage replacement involves new aluminum framing, engineering, permitting and installation.
Does a rescreen quote include frame repairs?
Not necessarily. Rescreening and structural repairs are different scopes of work. Bent aluminum, loose anchors, doors, corroded fasteners and damaged framing should be identified separately in the estimate.
Does pool enclosure rescreening require a permit?
Mesh-only replacement may be treated differently from structural alterations. Permit requirements vary by jurisdiction and project scope. Ask your contractor or local building department to confirm the requirements for your property.
What is the best screen for a Florida pool enclosure?
Standard 18×14 fiberglass is a practical, cost-effective choice for many homes. No-see-um mesh is useful for smaller insects, while heavy-duty polyester or pet-resistant screen may be better where durability is the main concern.
Get an Accurate Pool Enclosure Rescreening Quote
Online price ranges can help you establish a budget, but they cannot account for your cage’s height, roof design, panel dimensions, access or condition.
Florida Pool Enclosures provides professional pool enclosure rescreening throughout Central Florida and surrounding service areas. We can inspect your enclosure, explain the available screen materials and provide a written quote based on the actual project scope.
Add Value to Your Home With a Custom Screen Enclosure
Or call 407-260-2800.
Florida Pool Enclosures Proudly Services the Following Areas:
Orange County, Seminole County, Lake County, Osceola County, Volusia County, and Broward County. Our team commonly operates in Metro West, Doctor Phillips, Windermere, Kissimmee, Winter Garden, Gotha, Oviedo, Oakland, Apopka, College Park, Winter Park, Sorrento, Longwood, Altamonte Springs, Lake Mary, Heathrow, & Sanford
